Dust Free Concrete Grinding Polisher

Efficient dust-free system
One of the most notable features of the Dust Free Concrete Grinding Polisher is its efficient dust-free grinding system. Traditional concrete floor grinding usually produces a lot of dust, which not only affects the working environment, but also threatens the health of operators. To solve this problem, the equipment is designed with an advanced dust collection system that can absorb and collect dust in real time during the grinding process. The filtration efficiency of the dust collection system is as high as 99.97%, which can effectively capture dust particles as small as 0.3 microns in diameter, avoiding the spread of dust.

Strong power and stable working performance
The equipment is equipped with a 9.5-kilowatt high-power motor to provide strong power support. Compared with similar equipment, the high-power motor enables the machine to maintain high working efficiency in a more complex construction environment. The grinding speed of the equipment is adjustable, ranging from 0 to 1800 rpm, and the operator can flexibly adjust the grinding speed according to different construction requirements and ground conditions. For rougher floors, a higher speed can be selected to speed up the work process; for finer polishing operations, a lower speed can be selected to ensure the uniformity and fineness of the grinding effect.

Intelligent frequency conversion control and high adaptability
The Dust Free Concrete Grinding Polisher is equipped with an advanced frequency converter system with a power of 11 kilowatts, which can adjust the operating speed of the grinder according to different work requirements. The frequency conversion control system not only improves the accuracy of the machine, but also enhances its adaptability. When grinding different types of floors (such as cement floors, epoxy floors, stone materials, etc.), the equipment can accurately adjust the speed according to the hardness and wear of the floor to provide the best grinding effect.

Low noise and environmentally friendly operation
During the operation of the Dust Free Concrete Grinding Polisher, its noise level is controlled below 70 decibels. This noise level is lower than many traditional floor grinding equipment, which effectively reduces the impact of noise on operators and the surrounding environment. The low noise design not only provides a quieter working environment, but also meets the strict standards of modern construction for noise control, especially suitable for urban construction projects that require long-term or nighttime operations.

Adjust the height of the handle to make the manpower pull down the best state, pull down the handle, lift the whole base, support the foot to the ground smoothly, and then let go.

Diamond polishing pad is recommended. When installing the polishing pad, paste the polishing pad directly onto the polishing disc.

After the polishing mat is installed, step on the supporting part with your foot, hold the handle with your hand, and slowly turn the machine forward so that the whole machine is stable on the ground.

Turn on the start switch, run from low speed to high speed, and observe whether the machine is normal and smooth. The speed is adjusted to the ground condition, and the best speed is 1500-1800 in general. Low speed polishing, the effect will not be obvious.

Hot Tags: Dust Free Concrete Grinding Polisher, China Dust Free Concrete Grinding Polisher manufacturers, suppliers, factory, cement grinder, harbor freight concrete grinder, high speed polishing machine, floor grinder, floor concrete machine, concrete grinding